Changelog
Updates are free for license holders: every 1.x and 2.x version. The app tells you when a new version is available.
2.3.0
November 2026
New
- DNG export for Sigma X3F files. Choose DNG as the output file type to save a linear DNG that opens in Lightroom, Camera Raw and other raw editors. Fast Photo Sorter decodes the Foveon data and corrects the sensor; white balance, tone and color are then done in the raw editor, starting from the shot's white balance. The DNG carries an embedded preview, so it shows a thumbnail in Windows Explorer and in Fast Photo Sorter. Works for a single photo and with Export All, which skips non-X3F files.
- Texture slider. Brings out the mid-size detail of rock, bark, plaster and foliage without making skies and flat areas grainy. At 5 it matches the texture of Sigma Photo Pro; above 5 it gets stronger and also reaches the more pronounced detail. Clarity still controls fine sharpening. In the Export panel, in the stacking window and in export presets, for X3F and Bayer RAW files.
Improved
- Fujifilm RAF files are now supported, including X-Trans and GFX cameras: fast preview from the embedded JPEG, native RAW development, camera profiles, 16-bit TIFF and JPEG export, and stacking.
- sd Quattro H with DC lenses (for example the 17-50mm F2.8 OS): files the camera records in APS-C crop mode now open, develop and export correctly. On all sd Quattro H files, autofocus pixels are now corrected across the whole frame.
- DNG files from cameras, phones and Adobe DNG Converter: brightness now matches Lightroom, because the exposure stored in the file (BaselineExposure) is applied.
- Bayer RAW files: updated RAW engine (LibRaw 0.22.3), faster opening of Fujifilm X-Trans files and faster loading for all Bayer RAW files.
- Camera profiles: profiles whose camera name differs only by spaces are now found (for example the Adobe profiles for the Fujifilm GFX 100 II).
- Smaller compressed TIFF files: LZW-compressed 16-bit TIFFs are about 30% smaller, with the same pixels.
Fixed
- Bayer RAW files: the Export panel opened with Auto white balance instead of the shot's white balance, so the exported colors could differ from what you saw while browsing.
2.2.0
November 2026
Improved
- DP Merrill: more accurate color across the whole frame. Fast Photo Sorter now applies the same lens color-shading correction as Sigma Photo Pro. Before, the corners lost red and the center had a slight magenta tint; colors are now even from edge to edge and match SPP.
- DP Merrill: brightness and shadows matched to Sigma Photo Pro. Shadows and mid-tones are a little brighter, as in SPP, and gray areas in the shadows no longer have a slight green cast. Highlights still keep more detail than in SPP.
- Finer texture. Sharpening no longer mistakes the fine texture of stone, bark and foliage for noise, so it keeps the same crisp, gritty detail you see in Sigma Photo Pro. This applies to all cameras.
- Folder tree updates by itself. Subfolders created, deleted or renamed outside Fast Photo Sorter appear and disappear on their own, and the photo count next to each folder stays up to date.
- Camera profiles (DCP):
- The EXIF panel shows the profile in use for Bayer RAW files. Hover over it to see which file it comes from, so you can tell an Adobe profile from one of your own.
- Adding, replacing or deleting a profile in its folder is picked up right away, without restarting. Fast Photo Sorter checks the folders when you open the Export panel and when you come back to the app.
- Preferences → Camera Profiles: the Fast Photo Sorter profiles folder is always the first in the list, and Open opens the selected folder in Explorer.
- A link to the Adobe Camera Raw installer, for those who have no Adobe software: it installs the profiles for most cameras. Then click Find Adobe Profiles.
Fixed
- A camera profile deleted from its folder stayed in use until Fast Photo Sorter was restarted.
2.1.0
November 2026
New
- Color Mode. A new list in the Export panel and in the stacking window. As shot uses the mode set in the camera.
- Sigma (SPP): Standard, Vivid, Neutral, Portrait, Landscape, FOV Classic Blue and Monochrome, matched to Sigma Photo Pro on ColorChecker targets and real scenes. DP Merrill and SD1 files get their own tables, because SPP renders them differently.
- FPS Looks: Classic Color (warm, saturated colors with intense greens), Classic BW (high-contrast black and white with deep blacks) and Classic BW Soft (the same color-to-gray mix with normal contrast).
- Each mode shows a short description when you hover over it. Color modes also work with Bayer RAW files.
- Highlights and Fill Light. Two new sliders in the Export panel and in the stacking window. Highlights (−100 to +100) recovers or brightens the brightest areas, like in Lightroom; Fill Light (−2 to +2) opens up the shadows, like in Sigma Photo Pro.
- Camera profiles (DCP) for Bayer RAW files (DNG, CR2, CR3, NEF, PEF, ARW). Fast Photo Sorter uses the same kind of camera profiles as Lightroom and Camera Raw, so each camera gets its own color rendering.
- Profiles installed by Adobe Camera Raw, Lightroom or the free Adobe DNG Converter are found automatically.
- The Camera Profile list in the Export panel shows the profile in use and lets you pick another one. The choice is remembered for that camera model, batch export included.
- Custom profiles, such as those made with a ColorChecker, can be added with Tools → Import Camera Profile.
- Profile folders and the preferred profile are in Preferences → Camera Profiles.
Improved
- Bayer RAW files look much better: with a camera profile, colors and contrast are close to Lightroom with the same profile.
- Stacking: lamps, the sun and other bright light sources no longer turn into blown-out patches when the darkest frame still has detail there.
- Faster batch export: the next file is read from disk while the current one is being processed.
Fixed
- Stacking: a yellow cast in some merged images.
- sd Quattro H: a pink cast with files from older camera firmware.
2.0.0
November 2026
New
- Stacking. Mark two or more photos in the thumbnail strip (Ctrl+Click, Shift+Click) or open an X3I file, then choose File → Stack / HDR Merge. Fast Photo Sorter merges them into one image you can develop and export as a 16-bit TIFF.
- HDR / Denoise: bracketed exposures are merged so the darker frames recover the highlights and the brighter ones clean the shadows; shots at the same exposure are averaged to reduce noise. Up to 16 frames.
- Long exposure (ND filter effect): the frames are averaged by exposure time, like a single long exposure, so moving water, clouds and leaves become smooth. Up to 64 frames, loaded one at a time so memory use stays the same however many you add.
- Automatic alignment for hand-held shots, with a local refinement for parallax and small shifts. The exposure of each frame is measured from the image itself, not taken from the EXIF.
- Remove ghosts. Where something moved between frames, each frame is used only where it matches the reference, so moving subjects stay sharp without double edges. Runs on the GPU when available.
- Sigma X3I files (the multi-frame files of the dp Quattro and sd Quattro SFD mode) open in the thumbnail strip and can be merged in one step.
- JPEG export. Export to JPEG as well as 16-bit TIFF, with adjustable quality, for a single photo or a whole selection. The output format is saved in export presets.
- Native RAW PEF files development and 16-bit TIFF export.
- Stacking works with Sigma X3F/X3I files and with Bayer RAW files (DNG, CR2, CR3, NEF, PEF, ARW).
Improved
- sd/dp Quattro: thin red and brown details (frames, trims, stems) keep their real color instead of turning dark, while fine detail such as blades of grass stays as sharp as before.
Trial
- Files exported during the free trial (TIFF and JPEG) carry a watermark. Everything else works as before, and the watermark disappears as soon as you activate a license.
1.4.0
October 2026
New
- Native RAW development and 16-bit TIFF export for DNG, CR2, CR3, NEF and ARW. Native Raw decoding is enabled in Preferences Decoding Options as before. A small label "n" near the file type in the thumbnail shows when a file is decoded natively.
- Support for CR3 and NEF files. Either JPEG fast mode or Native Raw decoding is now supported for CR3 and NEF files.
- Faster full-size view for Bayer RAW files. When a new version is available, a small label appears in the info bar; click it to download.
Fixed
- the Saturation slider was ignored in single-image export.
1.3.1
October 2026
Improved
- The highlight clipping warning (zebra) now works in Compare too: press J to show it on both A and B at the same time.
- New View → Highlight Warning menu item to switch the zebra on and off (shortcut J).
- While the Export panel is open, the Decoding Options in Preferences are disabled, since they don't apply to the export preview. A short note explains why.
1.3.0
October 2026
New
- GPU acceleration. Noise reduction, sharpening and the development of sd/dp Quattro files can run on the graphics card (OpenCL). The detected GPU and its status are shown in Preferences, where you can also turn it off. If the GPU isn't available or reports an error, Fast Photo Sorter switches to the CPU on its own.
- Highlight clipping warning (zebra). Press J or tick Zebra (J) to cover blown highlights with diagonal stripes, like the zebra on a modern camera. For X3F files it is read from the RAW sensor data, so it shows where the Foveon layers are really saturated, whatever the exposure and contrast settings. For JPEG, TIFF, DNG and other RAW files it is based on the displayed image. Strong colors such as yellow leaves in the sun are not flagged: only areas that are actually white.
Improved
- Blown highlights on DP Merrill, sd/dp Quattro and the early DP1/DP2 now come out clean, neutral white instead of pink, magenta or grey.
- Faster noise reduction in the shadows.
- The photo on screen is always processed first: preloading the next shots in the background no longer slows it down.
- Smoother response of the sliders while adjusting the export preview.
- Keyboard shortcut reference (H) and welcome screen: added the J key.
1.2.1
October 2026
Improved
- More reliable license and update checks on unstable connections.
- Added Compare images to context menu.
1.2.0
October 2026
New
- Saturation slider in the Export panel. Range 0–10, default 5 (unchanged). Lowering it brings oversaturated and clipped colors back into range before they are cut off, which recovers texture in strong reds, flowers and lights. At 0 the image becomes monochrome at the same brightness.
- Export presets now store Saturation. Presets saved with earlier versions load with the default value (5).
Improved
- SD9/SD14/SD15/Merrill: cleaner TIFF exports. The small dark speckles in shadows and mid-tones are gone, and noise reduction now works as expected across the whole slider range.
- Preferences sliders move in 0.1 steps, like the Export sliders.
- SD Quattro H: more accurate colors and tones. Reds are rendered more faithfully, and shadows and overall brightness are better aligned with Sigma Photo Pro (checked on a ColorChecker).
1.1.0
October 2026
New
- Side-by-side compare. Press C or choose View → Compare Images to see two shots next to each other. Click a thumbnail to load it as B, Ctrl+click to load it as A. Zoom and pan are linked (L to unlink), Tab switches the active side, S swaps A and B, Esc exits. Ratings, reject and rotation apply to the active side. The folder tree is hidden while comparing to leave more room for the photos.
- Live preview in Preferences. The photo updates while you move the image adjustment sliders, instead of only after closing the window.
- Automatic update check. When a new version is available, a small label appears in the info bar; click it to download.
- License renewal reminder. If the license can't be renewed online, the info bar shows how many days are left before a connection is needed.
Improved
- The thumbnail strip now shows the rotation you applied by hand.
- Preferences sliders move in 0.1 steps, like the Export sliders.
- Keyboard shortcut reference (H): new Compare section and a cleaner layout.
Fixed
- Image orientation is now the same in the thumbnail, the preview, the full image and the exported TIFF, for all Sigma cameras (for example DP1 Quattro and DP2x). If you had rotated some photos by hand to work around this, check them again: they may now need to be set back.
1.0.0
October 2026
First public release: native X3F decoding for Sigma Foveon cameras from the SD9/SD10 to the Merrill and Quattro generations, star ratings and rating filters across subfolders, histogram and EXIF panels, and 16-bit TIFF export (single photo or whole selection) with export presets and an instant before/after view.